BIGIP – tmshコマンド対応表

bigpipe ⇔ tmsh

bigpipe tmsh
b arp all delete tmsh delete /net arp all
b arp show tmsh show /net arp all
b class <Data Group> mode read modify ltm data-group <Data Group> access-mode read-only
b config install <file.ucs> tmsh load /sys  ucs <file.ucs>
b class show tmsh show running-config /ltm data-group
b cluster show tmsh show /sys cluster
tmsh show /sys cluster all-properties
b config load <file.ucs> tmsh load /sys ucs <file.ucs>
b config save <file.ucs> tmsh save /sys ucs <file.ucs>
b config sync tmsh run /cm config-sync from-group|to-group <device group name>
b config sync all tmsh run /cm config-sync to-group <device group name>
b conn show tmsh show /sys connection
b conn show all tmsh show /sys connection all-properties
b conn ss server node-ip:node-port delete tmsh delete /sys connection ss-server-addr node-ip ss-server-port node-port
b daemon list tmsh list /sys daemon-ha all-properties
b db <key name> <value> tmsh modify /sys db <key name> value <value>
b db Platform.PowerSupplyMonitor disable tmsh modify sys db platform.powersupplymonitor value disable
b db LiveInstall.SaveConfig tmsh show running-config /sys db liveinstall.saveconfig
b db LiveInstall.SaveConfig disable tmsh modify /sys db liveinstall.saveconfig value disable
b db show tmsh show running-config /sys db -hidden all-properties
b export <file.scf> tmsh save /sys config file <file.scf> tar-file <file.tar>
b failover network failover tmsh list /cm device-group device_trust network-failover
b failover network failover enable tmsh modify /cm device-group devie_trust_group network-failover <enable|disable>
b failover show tmsh show /sys failover
b failover standby tmsh run /sys failover standby
b ha table tmsh show /sys ha-status all-properties
b hardware baud rate tmsh modify /sys console baud-rate
b ha table show tmsh show /sys ha-status all-properties
b httpd list tmsh list /sys httpd
b httpd allow default tmsh modify /sys httpd allow
b httpd allow show tmsh list /sys httpd allow
b httpd allow <Network/Mask> tmsh modify /sys httpd allow replace-all-with <Network/Mask>
b httpd allow <Network/Mask> add tmsh modify /sys httpd allow add <Network/Mask>
b httpd allow <Network/Mask> delete tmsh modify /sys httpd allow delete <Network/Mask>
b import <file.scf> tmsh load /sys <file.scf>
b import <file.scf> tmsh load /sys config file <file.scf> tar-file <tarfile.tar>
b interface show tmsh show /net interface
b interface show -j tmsh show /net interface -hidden all-properties
b list tmsh list
tmsh show running-config
b load tmsh load sys config partitions all
b merge tmsh load /sys config merge
b merge /path/to/file.txt tmsh load /sys config file /path/to/file.txt merge
b mgmt show tmsh show running-config /sys management-ip
b mgmt <IP Address> netmask <Mask> tmsh create /sys management-ip <IP Address>/<Mask>
b monitor show tmsh show running-config /ltm monitor
b nat show tmsh show /ltm nat all
tmsh list /ltm nat all-properties
b node all monitor show tmsh list ltm node monitor
b node show tmsh show /ltm node
b ntp servers <IP Address> tmsh modify sys ntp servers add { <IP Address> }
b packet filter all show tmsh show /net packet-fliter
b partition tmsh list auth partition
b persist show tmsh show ltm persistence persist-records
b persist show all  tmsh show ltm persistence persist-records all-properties
b platform tmsh show /sys hardware
b pool list tmsh list /ltm pool
b pool show tmsh show /ltm pool members
b profile auth all show all tmsh show /ltm auth profile all
b profile http ramcache show tmsh show /ltm profile http
b profile <http|ssl|tcp|udp|xml> show tmsh show /ltm profile <http|ssl|tcp|udp|xml>
b provision <Module Name> level nominal tmsh modify /sys provision <Module Name> level nominal
b provision level none tmsh modify /sys provision ltm level none
b profile persist profile_name list all tmsh list ltm persistence profile_name all-properties
b reset tmsh load / sys default-config
b reset tmsh load / sys config default
b route show tmsh show /net route all
b rule <rule> show all tmsh show /ltm rule <rule>
b rule show tmsh show /ltm rule all
b rule stats reset tmsh reset-stats /ltm rule <rule>
b save all tmsh save /sys config partitions all
b self show tmsh show running-config /net self
b snat tmsh show /ltm snat
b snatpool show tmsh show /ltm snatpool show
b software show tmsh show /sys software
tmsh show /sys software status
b software desired tmsh install /sys software image <File Name> volume HDX.Y reboot
b software desired tmsh install /sys software image <File Name> create-volume volume HDX.Y
b software desired tmsh install /sys software hotfix <File Name> volume HDX.Y
b stp show tmsh show running-config /net stp all-properties
b syslog list all tmsh list /sys syslog all-properties
b syslog remote server none tmsh modify /sys syslog remote-servers none
b syslog remote server test-srv host <IP Address> tmsh modify /sys syslog remote-servers add {test-srv{host <IP Address>}}
b syslog remote server test-srv local ip <IP Address> tmsh modify /sys syslog remote-servers modify {test-srv{local-ip <IP Address>}}
b system hostname tmsh modify /sys global-settings hostname <HostName>
b trunk show -j tmsh show /net trunk -hidden all
b trunk all lacp show tmsh show /net trunk detail
b verify load tmsh load /sys config verify
b version tmsh show /sys version
b virtual address show tmsh show /ltm virtual-address all-properties
b virtual list tmsh list /ltm virtual
b virtual all show all tmsh show /ltm virtual all-properties
b vlan all show all -j tmsh show /net vlan -hidden
b vlangroup all show all tmsh show /net vlan-group all
bigstart stop <Service Name> tmsh stop /sys service <Service Name>
bigstart start <Service Name> tmsh start /sys service <Service Name>
bigstart restart <Service Name> tmsh restart /sys service <Service Name>
bigstart status <Service Name> tmsh show /sys service <Service Name>

Linuxコマンド ⇔ tmsh

Linux Command tmsh
arp -an run /util bash -c “arp -an”
crontab -l run /util bash -c “crontab -l”
date run /util bash -c “date”
df -h run /util bash -c “df -h”
df -i run /util bash -c “df -i”
df -ik run /util bash -c “df -ik”
eud_info (version) run /util bash -c “eud_info (version)”
free run /util bash -c “free”
grub default -d run /util bash -c “grub default -d”
grub default -l run /util bash -c “grub default -l”
halid run /util bash -c “halid”
hsb snapshot (version) run /util bash -c “hsb snapshot (version)”
ifconfig -a run /util bash -c “ifconfig -a”
interrupts run /util bash -c “interrupts”
ip -f dnet addr show run /util bash -c “ip -f dnet addr show”
ip -f inet addr show run /util bash -c “ip -f inet addr show”
ip -f inet link show run /util bash -c “ip -f inet link show”
ip -f inet neigh show run /util bash -c “ip -f inet neigh show”
ip -f inet route show run /util bash -c “ip -f inet route show”
ip -f inet rule show run /util bash -c “ip -f inet rule show”
ip -f inet tunnel show run /util bash -c “ip -f inet tunnel show”
ip -f inet6 addr show run /util bash -c “ip -f inet6 addr show”
ip -f inet6 link show run /util bash -c “ip -f inet6 link show”
ip -f inet6 neigh show run /util bash -c “ip -f inet6 neigh show”
ip -f inet6 route show run /util bash -c “ip -f inet6 route show”
ip -f inet6 tunnel show run /util bash -c “ip -f inet6 tunnel show”
ip -f ipx addr show run /util bash -c “ip -f ipx addr show”
ip -f link addr show run /util bash -c “ip -f link addr show”
ip -f link link show run /util bash -c “ip -f link link show”
ip -f link neigh show run /util bash -c “ip -f link neigh show”
ip -f link route show run /util bash -c “ip -f link route show”
ls -las /var/local/ucs run /util bash -c “ls -las /var/local/ucs”
ls -lasLR /dev/mprov/ run /util bash -c “ls -lasLR /dev/mprov/”
ls -lasLR /var/core run /util bash -c “ls -lasLR /var/core”
ls -lasR /boot run /util bash -c “ls -lasR /boot”
ls -lasR /hotfix run /util bash -c “ls -lasR /hotfix”
lsof -n run /util bash -c “lsof -n”
meminfo run /util bash -c “meminfo”
mount run /util bash -c “mount”
netstat -nge run /util bash -c “netstat -nge”
netstat -ni run /util bash -c “netstat -ni”
netstat -pan run /util bash -c “netstat -pan”
netstat -sa run /util bash -c “netstat -sa”
ntpdc -n -c peer 127.0.0.1 run /util bash -c “ntpdc -n -c peer 127.0.0.1”
ntpq -pn run /util bash -c “ntpq -pn”
pci run /util bash -c “pci”
pstree run /util bash -c “pstree”
qkview run /util qkview
rpm -qa run /util bash -c “rpm -qa”
switchboot -l run /util bash -c “switchboot -l”
sysctl run /util bash -c “sysctl”
top run /util bash -c “top”
vmstat run /util bash -c “vmstat”
who -aH run /util bash -c “who -aH”
スポンサーリンク
スポンサーリンク

フォローする

スポンサーリンク
スポンサーリンク